Wednesday, 25 May 2016

Entangled Strip tutorial - Ruth

 The Entangled Strip dies can be used in several different ways eg to create decorative panels in the card, or when used with one edge they can form a border or even a strip when used with both edge dies.
I've used the Big Day set to form borders on this shaped card and have shown all the steps below so you can try it for yourself :)

To make this card you will need:
white card (A4 plus extra)
aqua card
navy card
Tonic Studios Apple Blossom die set
Crystal Drops - Midnight Blue
Funky glue
double sided tape
die cutting machine

 


How to make it :
 1. Place the outer die on the outside edge of an A4 sheet of white card and tape in place as shown. 

 2. Pass through the die cutting machine.

3. Carefully place the detail die on top and tape in place with masking tape.

4. Pass through the die cutting machine.

 5. Score and fold the card at 4.5cm from the edge of the pattern on the right side - this will be 3cm from the cut edge of the pattern on the left side. Cut so that the back of the card measures 15cm.

 6. Cut a piece of aqua card measuring 15cm x 21cm and attach to the back of the white patterned part with double sided tape. This will become the card front.

 7. Cut a piece of aqua card measuring 14.5cm x 21cm.
Score along the length at 1.5cm. Score and make a valley fold at 6.5cm in from the unfolded edge. This is the halfway mark of the unfolded card.
Make marks at 3.5cm from the top and bottom of the 13cm part and score diagonally across them as shown in a mountain fold.

8.  It will then look like this. Add double sided tape along the 1.5cm folded edge.

9. Attach the folded part to t he bottom part of the card front as shown.

 10. Cut a strip of navy card measuring 9cm x 21cm and tape the outer die to the edge. Pass through the die cutting machine.

 11. Add the detail die on top of the cut out and tape in place. Pass through the die cutting machine.

 12. Glue the navy die cut to  the bottom of the folded part of the card.

 Side view

 13. Cut our 4 of the small die shapes - 2 white and 2 navy.

 14. Glue to the card as shown above.

Decorate with Apple Blossom flowers, Midnight Blue Crystal Drops (with Aqua glitter on top). Add a strip of double sided tape across the bottom and sprinkle on Aqua glitter. Tap off excess.
Layer white and navy offset Tangled Posies die cuts and glue to the centre of the card. Add navy and aqua offset "Congrats" to the top and some swirls from the Apple Blossom die set to finish :)



3 comments:

  1. Hi Ruth
    This is a lovely project, thank you for the tutorial X X X

    ReplyDelete
  2. Jayati Tools Private Limited is a trusted company which is Manufacturer and Supplier of scaffolding equipment all over the world. We are manufactur the Scaffolding Accessories, composite die holder, scaffolding socket, Tuff Scaffolding Machine and all types of Scaffolding equipments. www.scaffoldingmachines.com

    ReplyDelete
  3. Aar aar enterprises is the one of them are manufacturer and provider aluminum extrusion industry in India has flourished for a long time product aluminium extrusion suppliers
    http://www.aaraarenterprises.in

    ReplyDelete